{"product_id":"tapcon-3-25","title":"Phillips Head Tapcon-Style Blue Concrete Screw 1\/4\" x 3.25\" (100\/bx)","description":"\u003cp\u003e\u003cstrong\u003eTapcon-Style 1\/4\" x 3-1\/4\" Concrete Screw Anchor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt for fastening into concrete, block, and masonry without slowing the job down. This Tapcon-style screw gives contractors a strong mechanical hold with a sharp point and hi-lo thread design that helps drive faster and bite clean.\u003c\/p\u003e\n\u003cp\u003eThis 1\/4\" x 3-1\/4\" concrete screw anchor is made from carbon steel and finished with a Ceramic Blue 500-hour coating for added corrosion resistance. The flat Phillips head is suited for flush-style fastening where a clean finished surface matters, and the sharp point helps start quickly in properly pre-drilled material.\u003c\/p\u003e\n\u003ch3\u003eWhy Contractors Choose It\u003c\/h3\u003e\n\u003cp\u003e🔩 \u003cstrong\u003eTapcon-style fastening:\u003c\/strong\u003e Made for anchoring into concrete, block, and masonry applications.\u003c\/p\u003e\n\u003cp\u003e🧱 \u003cstrong\u003eHi-lo thread design:\u003c\/strong\u003e Helps improve grip and holding power in masonry base materials.\u003c\/p\u003e\n\u003cp\u003e🛠️ \u003cstrong\u003eSharp point:\u003c\/strong\u003e Starts easier and helps keep installation moving on the job.\u003c\/p\u003e\n\u003cp\u003e📏 \u003cstrong\u003e1\/4\" diameter x 3-1\/4\" length:\u003c\/strong\u003e Good fit for deeper embedment and solid anchoring applications.\u003c\/p\u003e\n\u003cp\u003e⬜ \u003cstrong\u003eFlat Phillips head:\u003c\/strong\u003e Ideal where a lower-profile, flush-style finish is needed.\u003c\/p\u003e\n\u003cp\u003e🛡️ \u003cstrong\u003eCeramic Blue 500Hr finish:\u003c\/strong\u003e Added protection against corrosion in demanding exterior and general jobsite conditions.\u003c\/p\u003e\n\u003cp\u003e⚙️ \u003cstrong\u003eCarbon steel construction:\u003c\/strong\u003e Built for dependable jobsite fastening strength.\u003c\/p\u003e\n\u003cp\u003e🚫 \u003cstrong\u003eNo fitted sealing washer:\u003c\/strong\u003e Best suited for applications that do not require an integrated washer seal.\u003c\/p\u003e\n\u003ch3\u003eHow To Use\u003c\/h3\u003e\n\u003cp\u003e1. Pre-drill the base material using the correct masonry drill bit size for the anchor.\u003c\/p\u003e\n\u003cp\u003e2. Clean dust from the hole to help improve anchor performance.\u003c\/p\u003e\n\u003cp\u003e3. Position the material being fastened and drive the screw with a Phillips bit.\u003c\/p\u003e\n\u003cp\u003e4. Tighten until the flat head seats properly without overdriving.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter\/Size:\u003c\/strong\u003e 1\/4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 3-1\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead Type:\u003c\/strong\u003e Flat\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrive Type:\u003c\/strong\u003e Phillips\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead\/Drive Detail:\u003c\/strong\u003e Flat Phil\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal Type:\u003c\/strong\u003e Carbon Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish Type:\u003c\/strong\u003e Ceramic Blue 500Hr\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThread Type:\u003c\/strong\u003e Hi-Lo Thread \/ Drill: 5\/32\" x 5-1\/2\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePoint Type:\u003c\/strong\u003e Sharp Point\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWasher:\u003c\/strong\u003e No Fitted Sealing Washer\u003c\/p\u003e\n\u003ch3\u003eImportant Note\u003c\/h3\u003e\n\u003cp\u003eAlways match the drill bit and installation method to the base material and application requirements. For best results, do not over-torque during installation.\u003c\/p\u003e\n\u003ch3\u003e⚠️ California Proposition 65 Warning\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals including metals or coatings known to the State of California to cause cancer and\/or reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"ScrooScoop Fastener","offers":[{"title":"Default Title","offer_id":50565718638894,"sku":"100-691","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0940\/4543\/8254\/files\/RO-Mar22_2026_02_00_57PM.jpg?v=1774202475","url":"https:\/\/rooferoutlet.com\/products\/tapcon-3-25","provider":"RooferOutlet.com","version":"1.0","type":"link"}