Malco 24" Sheet Metal Folding Tool β 3/8" & 1" Fixed Depth, #24F
The Malco 24F 24" Sheet Metal Folding Tool makes straight, even folds in sheet metal. Two steel halves are permanently joined to give you two fixed fold depths: 3/8" (9.5 mm) and 1" (25.4 mm). Sight holes let you line up the edge of the metal for the right depth every time.
It's rated for mild steel up to 24 gauge (.024" / 0.61 mm). The 24" length gives you longer folds and can be used as a mini brake for roofing and siding trim, as well as HVAC duct work.
Why Contractors Choose It
π Two fixed fold depths β 3/8" and 1"
ποΈ Sight holes β line up the metal for an accurate depth
π© Two steel halves permanently joined β nothing to adjust or lose
π 24" length β long, straight folds
π Mini brake β for roofing, siding trim and HVAC duct work
π‘οΈ Limited lifetime warranty
How To Use
1οΈβ£ Mark the fold line on the sheet metal.
2οΈβ£ Slide the edge of the metal into the 3/8" or 1" side and check it through the sight holes.
3οΈβ£ Rotate the tool to fold the metal along its length.
4οΈβ£ Flatten or close the fold as needed and remove the tool.
Notes
Model: 24F
Type: Sheet metal folding tool, fixed length and depth
Length: 24" (61 cm)
Fold Depths: 3/8" (9.5 mm) and 1" (25.4 mm)
Capacity β Mild Steel: 24 gauge (.024" / 0.61 mm)
Weight: 42 oz (1191 g)
Construction: Two steel halves, permanently joined, with sight holes
Warranty: Limited lifetime
β οΈ California Proposition 65 Warning
This product may expose you to chemicals including metals known to the State of California to cause cancer or reproductive harm. For more information visit www.P65Warnings.ca.gov.