Malco 14" Andy Classic Aluminum Handled Snips – Pattern Cut, #M14A
The Malco M14A 14" Andy Classic Aluminum Handled Snips are pattern snips for straight shearing, mild curve cuts and cutting multiple layers of material. They are a go-to for vinyl siding, aluminum, copper and sheet metal.
A long 3-1/4" cutting length makes fast work of long straight cuts, and the sleek head design improves maneuverability in tight spots like J-channel. The light gray aluminum frame has the original Andy Classic handle loops, and the flat ground inset steel blades are field-replaceable (M14ARB).
Why Contractors Choose It
📏 Long 3-1/4" cutting length — fast, long straight cuts
✂️ Pattern cut — straight cuts, mild curves and multiple layers
🎯 Sleek head design — easier cuts in J-channel and tight areas
🪶 Aluminum frame — lightweight with original Andy Classic handle loops
🔁 Replaceable inset steel blades — M14ARB replacement blades
🏠 Cuts vinyl, aluminum, copper and up to 24 gauge steel
How To Use
1️⃣ Mark your cut line on the material.
2️⃣ Open the snips fully and set the material deep in the jaws.
3️⃣ Make long, full strokes for a clean, straight cut — don't close the blades all the way at the end of each stroke.
4️⃣ Wipe the blades clean after use and replace them when they dull.
Notes
Model: M14A
Type: Andy Classic aluminum handled pattern snips
Cuts: Straight, mild curves, multiple layers
Overall Length: 14" (36 cm)
Cutting Length: 3-1/4" (82.6 mm)
Blades: Inset steel, flat ground edges
Frame: Light gray aluminum
Weight: 22 oz
Capacity – Vinyl: .055" (1.40 mm)
Capacity – Aluminum: .035" (0.89 mm)
Capacity – Copper: .023" (0.58 mm)
Capacity – Stainless Steel: 26 gauge (.018")
Capacity – Galvanized Steel: 24 gauge (.028")
Capacity – Mild Steel: 24 gauge (.024")
Replacement Blades: M14ARB
Warranty: Limited lifetime
⚠️ California Proposition 65 Warning
This product may expose you to chemicals including metals known to the State of California to cause cancer or reproductive harm. For more information visit www.P65Warnings.ca.gov.