Malco RedLine 3" Offset Hand Seamer with Forged Jaws, #S3R
The Malco S3R 3" Offset Hand Seamer bends, folds, flattens and straightens sheet metal. The offset jaws keep your hand clear of the work, which makes overhead bends and work near walls or roof edges easier.
Drop-forged jaws are 3-1/4" (82.55 mm) wide with depth markings in 1/4" increments up to 1-1/4" (31.8 mm), so you can make consistent bends. RedLine handles give 7:1 compound leverage, and the seamer handles up to 24 gauge galvanized steel.
Why Contractors Choose It
π Bends, folds, flattens and straightens β one tool for flashing and trim
βοΈ Offset jaws β easier overhead work and bends near obstructions
π οΈ Drop-forged jaws β strong, rigid and long-lasting
π Depth markings in 1/4" increments β consistent bends to 1-1/4"
ποΈ RedLine handles β 7:1 compound leverage, non-slip grip inserts and spring action
πͺ Handles up to 24 gauge galvanized steel
How To Use
1οΈβ£ Mark your bend line on the sheet metal.
2οΈβ£ Set the metal in the jaws to the depth mark you need.
3οΈβ£ Squeeze the handles and rotate the seamer to make the bend.
4οΈβ£ Move along the edge and repeat for a long, even bend.
Notes
Model: S3R
Type: Offset hand seamer, forged jaws
Jaw Width: 3-1/4" (82.55 mm)
Jaw Depth: 1-1/4" (31.8 mm), marked in 1/4" increments
Capacity: 24 gauge galvanized (0.71 mm) / 0.61 mm mild steel
Weight: 24 oz (680 g)
Handles: RedLine, 7:1 compound leverage
UPC: 686046534435
Warranty: Limited lifetime
β οΈ California Proposition 65 Warning
This product may expose you to chemicals including metals known to the State of California to cause cancer or reproductive harm. For more information visit www.P65Warnings.ca.gov.