Malco RedLine Gutter End Cap Crimper / Adjustable Snap Lock Punch, #SL2R
The Malco SL2R Gutter End Cap Crimper is an adjustable snap lock punch that crimps gutter end caps tight or makes locking tabs in light sheet metal. It's a must-have for gutter installers and sheet metal shops.
A slide-adjustable throat sets the crimp depth from 1/4" to 5/8" (6–16 mm), so you can match the job. Hardened stamped jaws and handles have a nickel plate and black oxide finish, and RedLine handles give 7:1 compound leverage.
Why Contractors Choose It
🏠 Crimps gutter end caps — tight, secure end cap installs
🔒 Makes locking tabs — snap lock joints in light sheet metal
📏 Slide-adjustable throat — 1/4" to 5/8" (6–16 mm) depth
🛠️ Hardened stamped jaws and handles — nickel plate and black oxide finish
🖐️ RedLine handles — 7:1 compound leverage, non-slip grip inserts and spring action
👍 One-hand latch — easy operation and compact storage
How To Use
1️⃣ Slide the throat adjustment to the depth you need.
2️⃣ Set the end cap or sheet metal edge into the jaws.
3️⃣ Squeeze the handles to crimp, then move along and repeat.
4️⃣ Check the fit and re-crimp any loose spots.
Notes
Model: SL2R
Type: Gutter end cap crimper / adjustable snap lock punch
Throat Depth: Slide-adjustable 1/4"–5/8" (6–16 mm)
Jaws: Hardened stamped carbon steel
Finish: Nickel plate and black oxide
Overall Length: 9" (229 mm)
Weight: 16 oz
Handles: RedLine, 7:1 compound leverage
Capacity – Aluminum: .035" (0.89 mm)
Capacity – Copper: .023" (0.58 mm)
Capacity – Stainless Steel: 26 gauge
Capacity – Galvanized Steel: 24 gauge
Capacity – Mild Steel: 24 gauge
Warranty: Limited lifetime
⚠️ California Proposition 65 Warning
This product may expose you to chemicals including metals known to the State of California to cause cancer or reproductive harm. For more information visit www.P65Warnings.ca.gov.