Replacement Nailing Plate for Slater Roof Bracket – Galvanized Steel
This replacement nailing plate puts worn or bent slater roof brackets back in service. The plate — often called the tongue — nails to the roof deck under the slate or shingle course, and the bracket hooks onto it to support a plank for slate and steep-slope work.
The slotted design gives several positions for setting the bracket, and the bracket lifts off the plate when the job is done. It is made from galvanized steel to resist rust.
Why Contractors Choose It
🔧 Restores slater brackets — replace bent or worn tongues
🪵 Nails under the course — no exposed holes in the finished roof
↕️ Slotted plate — several bracket positions
🧱 For slate and steep-slope roofs
💧 Galvanized steel — resists rust
💲 Cheaper than a new bracket
How To Use
1️⃣ Remove the old, bent or worn nailing plate from the bracket.
2️⃣ Slip the new plate under the course where the bracket goes and nail it through the plate into solid deck or rafter.
3️⃣ Hook the bracket onto the plate and set a plank, then load-test before working.
4️⃣ When the job is done, lift off the bracket and remove or cut off the plate.
Notes
Type: Replacement nailing plate (tongue)
For: Slater style roof brackets
Material: Galvanized steel
Design: Slotted for multiple bracket positions
Confirm fit with your bracket before use
Inspect brackets and plates before each use
⚠️ California Proposition 65 Warning
This product may expose you to chemicals including metals known to the State of California to cause cancer or reproductive harm. For more information visit www.P65Warnings.ca.gov.