BMF Roofing Pail Anchor – Steep Slope Pail & Tool Holder with Trowel and Tool Cups
Roofing on steep slopes is tough enough without chasing a runaway bucket. The Pail Anchor locks your plastic cement pail upright and keeps your trowel and go-to tool right beside it, so you can focus on the work instead of the slip.
Built by BMF Roofing Solutions for steep-slope crews, the Pail Anchor keeps everything organized and within reach, cutting down wasted ladder trips and spilled material. It's lightweight to carry, simple to set up, and its bright color stands out on any jobsite.
Why Contractors Choose It
🪣 Keeps Pails Steady – Non-slip foam base holds your cement pail upright on pitches up to 12/12 (45°)
🧰 Built-In Trowel & Tool Cups – Keep your trowel and an extra tool organized and within reach
🔒 Snap-In Fit – Push the pail down firmly until it clicks into place
🔄 Works With the Slope – Choose the side that matches the roof pitch
⏱️ Fewer Ladder Trips – Stage cement and tools on the roof and keep production moving
🦺 Safer Jobsite – Reduces sliding pails and spills, and the high-visibility color stands out
🪶 Tough but Lightweight – Only 3.75 lbs, rugged enough for daily roofing use
How To Use
1. Choose a side according to the slope of the roof
2. Place the trowel cup and tool cup before inserting the pail
3. Push the plastic cement pail down firmly until it clicks into place
4. Use the pail handle to move the Pail Anchor to your work area
What's Included
Pail Anchor body, 1 trowel cup, and 1 tool cup. Pail and tools not included.
Specifications
Width: 17.13"
Length: 22.07"
Height: 8.9"
Weight: 3.75 lbs
Weight Capacity: 250 lbs (113 kg) max load
Safety Guidelines
Keep the pail fully upright and do not use on slopes greater than 12/12 (45°). Use only on clean, dry roof surfaces – not on wet, frosty, icy, oily, dusty, granular or powdery surfaces. Do not use if the foam base is wet or has been wet, since the water-based adhesive will lose its grip. Use between 32°F and 95°F (0°C–35°C).