6-in-1 Screwdriver – Phillips, Slotted & Nut Driver Bits, Triangular Grip
This 6-in-1 screwdriver puts six common drivers in one tool for roofing, siding, gutter and general repair work. Two double-ended chrome vanadium bits give you #1 and #2 Phillips and 3/16" and 1/4" slotted tips, and the reversible shaft doubles as 1/4" and 5/16" nut drivers.
Ball-and-spring retention holds the bits securely in the shaft, so they don't fall out when you work overhead. The co-molded rubber triangular handle won't roll off a roof deck and gives a non-slip grip for extra turning power. The driver measures 8" overall.
Why Contractors Choose It
🪛 6 tools in 1 — #1 and #2 Phillips, 3/16" and 1/4" slotted
🔩 Built-in nut drivers — 1/4" and 5/16" from the reversible shaft
💪 Chrome vanadium bits — tough and wear resistant
🔒 Ball-and-spring retention — bits stay put
✋ Triangular rubber grip — non-slip and won't roll away
📏 8" overall — good reach with control
How To Use
1️⃣ Pull the bit out of the shaft and flip it to the tip you need.
2️⃣ For a nut driver, pull the shaft from the handle and reverse it to the 1/4" or 5/16" end.
3️⃣ Seat the tip fully in the screw or on the nut and turn with steady pressure.
4️⃣ Press the bit back in until the ball-and-spring retention clicks.
Notes
Type: 6-in-1 screwdriver
Phillips: #1 and #2
Slotted: 3/16" and 1/4"
Nut Drivers: 1/4" and 5/16"
Bits: Chrome vanadium, double ended
Retention: Ball and spring
Handle: Co-molded rubber, triangular
Overall Length: 8"
⚠️ California Proposition 65 Warning
This product may expose you to chemicals including metals known to the State of California to cause cancer or reproductive harm. For more information visit www.P65Warnings.ca.gov.